Leapmotor OTA FeaturesLeapmotor OTA Features
All ideas

Climate Control AUTO Mode Needs More Dynamic Fan Response

I would like to report an issue regarding the automatic climate control behavior on the Leapmotor B10. I have been driving cars equipped with automatic climate control systems for more than 20 years, across many different brands and vehicle segments, and I have never experienced an automatic mode behaving like the one currently implemented in the B10. In a typical automatic climate control system, when entering a vehicle with a very high cabin temperature — for example around 32°C — while the target temperature is set to 22°C, the system normally reacts aggressively at first: the fan speed immediately increases to a high level in order to cool the cabin down as quickly as possible. Then, as the interior temperature approaches the selected target temperature, the fan speed progressively decreases automatically, eventually stabilizing at a low and comfortable level just sufficient to maintain the desired temperature. The Leapmotor B10 does not currently behave this way. With an interior temperature around 32°C and the climate control set to 22°C in AUTO mode, the system usually limits the fan speed to level 2 or 3 only. Because of this, the cabin cools down very slowly and often does not reach a comfortable temperature in a reasonable amount of time. As a result, I am frequently forced to disable AUTO mode and manually adjust: fan speed airflow direction ventilation intensity This defeats the purpose of having an automatic climate control system. Based on my experience with many vehicles over the years, this behavior does not seem normal for a modern automatic climate control system, especially in a technologically advanced vehicle like the Leapmotor B10. I believe the AUTO mode algorithm should be improved through a future OTA update so that the system can react more dynamically and aggressively when there is a large temperature difference between cabin temperature and target temperature. At the moment, the current behavior makes the user experience less comfortable and less refined than expected.

Activity · 5
Alex Kamburov
Alex Kamburov5mo
The said default aggressive reaction set by the industry is why i don't use AUTO in my current Kia. I don't want my head to be blown away to even the temperature more quickly. Looking forward to test it with B10.
bertolostefano
bertolostefano5mo
I also don't like automatic mode. There's also the problem that in automatic/cooling mode, only the front air vents are activated, and if the fan speed is too high, it can be very annoying for people sitting in the front seats. It would be helpful to also activate the other air vents when increasing the fan speed in automatic mode to avoid this annoyance.
Mauro Campassi
Mauro Campassi5mo
Also C10 have the same Issue. I also noticed that the air outlet temperature is almost always very hot or very cold, regardless of the difference between the desired temperature and the measured temperature. Furthermore, when the outside temperature is similar to the desired one, the cooling/heating representation mode on the display is correct, but the air comes out in the opposite mode.
dsolari
dsolari4mo
Same here on a C10 REEV. Auto mode doesn't seem to work at all. It doesn't try to hit the target temperature. I've often seen it continue to heat up instead to cool down the temperature when needed. And vice-versa. It feels so frustrating such a simple thing failing to work properly. Invested a lot of money to get this new high-tech car and would love such basic common feature to work.
alvy26
alvy264mo
On the B10 expericing similarly.

More in Feature