[B10 / LeapOS 3.41.30] Severe AC charging inefficiency (~2 kW continuous thermal drain & phase drop below 16A)
Since updating my Leapmotor B10 to LeapOS 3.41.30, AC charging efficiency has dropped significantly due to two related issues: Continuous \~2 kW parasitic drain during AC charging: The heat pump and cooling fan run continuously throughout the entire AC charging session, even in mild/cool ambient temperatures. On a recent full 3-phase 16A (11 kW) session, the wallbox delivered 42.97 kWh, while only 36.80 kWh reached the battery (6.17 kWh lost / \~85.6% efficiency). Forced drop to 1-phase below 16A: Whenever the wallbox throttles current below 16A (e.g., during dynamic load balancing or solar charging), the onboard charger drops from 3-phase to 1-phase (\~3.5 kW). Combined with the constant \~2 kW thermal loop draw, charging losses exceed 60%, making smart/throttled AC charging unusable. Troubleshooting already attempted: Performed a full factory reset (did not resolve the issue). Locked wallbox to fixed 16A 3-phase as a temporary workaround. Expected behavior: Heat pump/cooling fan should only run when battery or OBC temperatures actually require active cooling/heating. Smooth current modulation across 3 phases without dropping to 1-phase prematurely.
